Forum Announcement Forums General Technical Questions GE Networx NX4 V2 beeps at midnight

This topic contains 1 reply, has 1 voice, and was last updated by  Josephfueft 1 month, 4 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #321028

    JamiJames
    Participant

    Hello – we have a GE Networx NX4 V2 that was originally installed with the house 12 years ago. It has started beeping at midnight on a regular basis. It stops when the user code is input. I thought the problem was that the battery was low because the power light blinks constantly. I removed the battery, but it beeped again last night. Does anyone have a suggestion for making the midnight beep stop? I’m concerned about disconnecting the whole thing because I am unsure if that will affect the smoke alarms which are wired into the house.

    Thank you for any help!!
    JamiJames

    #322982

    JamiJames
    Participant

    Hello ChosunOne – thank you very much for your answer and suggestions. I have a battery on the way. If that doesn’t correct it, I’ll try what you suggested and check out the other forum. I really appreciate your help!!

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.